![]() ![]() This highest quality finish is the most effective method to provide a uniform surface and minimize the possibility of joint photographing and of fasteners showing through the final decoration. This level of finish is highly recommended where gloss, semi-gloss, enamel, or non-textured flat paints are specified or where severe lighting conditions occur. Fastener heads and accessories covered with three separate coats of joint compound. ![]() Tape embedded in the joint compound on all joints and interior angles and two separate coats of joint compound over all flat joints and one separate coat of joint compound applied over interior angles. Drywall Level 5Ī thin skim coat of joint compound applied to the entire surface. Gloss, semi-gloss, and enamel paints are not recommended over this level of finish. In critical lighting areas, flat paints applied over light textures tend to reduce joint photographing. This level is typically used where flat paints, light textures, or wall coverings are to be applied. Tape embedded in the joint compound with two separate coats of joint compound on all flat joints and one separate coat of joint compound applied over interior angles. This level of finish is not recommended where smooth painted surfaces or light to medium wall coverings are specified. Typically found in residential interiors and in appearance areas which are to receive heavy- or medium-texture (spray or hand applied) finishes before final painting, or where heavy-grade wall coverings are to be applied as the final decoration. Tape embedded in the joint compound with one additional coat of joint compound applied over all joints and interior angles, plus two coats of joint compound on fastener heads and accessories. For non-finished areas behind tile and built-ins, in garages, warehouse storage, or other similar areas where surface appearance is not of primary concern. Drywall Level 2Ī double coating of joint compound over all joints, interior angles, fastener heads, and accessories. Some degree of sound and smoke control is provided. Frequently specified in plenum areas above ceilings, in attics, in areas where the assembly would generally be concealed or in building service corridors, and other areas not normally open to public view. Single coat with taping set in the joint compound on all joints and interior angles. This level of finish may be useful in temporary construction or whenever the final decoration has not been determined. Many homeowners and builders need a little help in understanding the 6 levels of drywall service we offer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |